Titanium Clad Copper Plate

Product details

1.product Introduction

Titanium clad copper plate is a clad material composed of titanium plate and copper plate by explosive welding or explosion+rolling, which integrates the physical, chemical and mechanical properties of titanium plate and copper plate to save cost for customers. Titanium clad copper plate has excellent conductivity and is fully ductile for shaping and forming.

2. Product parameters

3.Feature

Titanium clad copper plate has the advantages of titanium layer and copper layer.Copper layer has an excellent conductivity and is fully ductile for shaping and forming.titanium layer has high anti-corrosion and Long time working life.

4.Application

Electrolytic manganese dioxide

Electrolytic manganese dioxide (EMD) is the critical component of the cathode material in modern alkaline, lithium, and sodium batteries including electrochemical capacitors and hydrogen production. Application of Titanium clad copper plate lifting lug in seed plate tank of copper electrolysis production.

5.Product qualification

Test Equipment: Thickness Detection Equipment

RT Detection Equipment & Alloy Analyzer

6.FAQ

1) What are the methods of producing clad plate?

Pouring method, forging method, powder metallurgy method, powder metallurgy rolling method, welding method (diffusion welding, surfacing), rolling bonding method, explosive welding, explosive welding plus rolling method and so on. Based on metal properties, product specifications, service conditions of clad plate, market demand, technological progress and equipment update, rolling clad method, explosive welding and explosive welding rolling method are the main production methods at present.

2) Principle of rolling clad method?

There are two kinds of rolling compound method, cold rolling and hot rolling. The basic principle is: under the strong pressing action of rolling mill, or the combination of preheating action, plastic deformation occurs on the cross section of two metal materials to be compound, resulting in plastic deformation or fracture of the surface to be compound, and then clean, activate, and continue to form a planar metallurgical bonding form under the action of strong stress. It is different from single metal rolling in that a strong pass reduction must be applied, especially the initial pass. Only under this condition can the physical contact between the two metal materials to be compounded be made as full as possible.

3) Principle of explosive welding?

Metal explosive welding is a metal processing technology that uses explosives as energy to weld two or more metal materials into one. Large area metal explosive welding is called metal explosive composite. It is different from other metal clad plate production methods. In a very short time, it is in the order of microseconds, the workpiece is applied with high-voltage pulse load (about 1000000 ATM), the loading stress is far higher than the dynamic yield strength of the metal material; the loading process is instantaneous, within a few microseconds; the workpiece only bears the load locally, and it is in a state of high-speed movement, and the deformation only occurs in the action zone The bonding zone is a wavy metallurgical bonding form.

4) Principle of explosive welding plus rolling?

Based on the advantages of the above two production methods, the thick composite slab is made by explosive welding, and then the required thickness, width and length of composite slab are made by hot rolling or cold rolling according to different conditions or requirements. This is not only a production method, but also a technological progress, and also promotes the improvement of equipment manufacturing, which greatly improves the quality, reliability and service life of the equipment.

http://www.bjtcmetal.com/